Resolved Questions

Tonymendes

GS1 Logistic Label - Decodability issue - IV

Hi Ben,

In response to
https://support.idautomation.com/Barcode-Fonts/GS1-Logistic-Label---Decodability-issue---III/_1320

It is GS1-128 bar code Please look at http://www.gs1au.org/assets/documents/info/user_manuals/Bar_Code_Technical_Details_2013.pdf

Subtitle 10.8GS1-128 Bar Code Specifications ( I got the page number wrong, it is page 109 of the document)
The text is as follows
The extent of variation in print gain determines the minimum magnification factor by which the entire bar code must be
magnified (or reduced) in relation to a bar code at 100% magnification (X-dimension1.016mm).
The magnification factor (X-dimension) depends on the scanning environment:
For scanning in a General Distribution Scanning Environment magnification factors are between 48.7% and 100% (X-dimension 0.495mm - 1.016mm). For GS1-128 Symbols containing the Application Identifier (00): Serial Shipping Container Code (SSCC), the minimum magnification range is 48.7% - 92.5% (X-dimension 0.495mm - 0.940mm). For other scanning environments refer to “Symbology Operational Bands” on page 4 or contact GS1 Australia.

Can you assist

regards

Tony

08-26-13 10.5 year(s) ago

Report Abuse


Ben	Best Answer The IDAutomation Code 128 Font Package can generate the GS1-128 Specification. You will need to perform your own calculation to derive the correct size for your requirement as it will vary between GS1-sub standards and the amount of data. Based on the information you provided yesterday, the calculation remains valid--whether it is GS1-128 or ITF14. If you have a different magnification range, you can use the calculation in post GS1 Logistic Label - Decodability issue - III to produce the appropriate mils. Then compare the mils to the point size in the Code 128 Specifications list. Posted 10.5 year(s) ago (0) (0) Report Abuse

Find Interesting

Email to Others

Bookmark

Subscribe to Answer Alert

Add Comment

No comments yet. Be the first to comment.

Categories

» Barcode Applications » Barcode Components ● Barcode FAQ » Barcode Fonts » Barcode Hardware ● Barcode Learning » Font Encoders ● General License Questions ● General Sales Questions » MICR & OCR Fonts » Other ● Product Updates » Saas Hosted Products

Email this question link to friends

Your comment on this question

Allows to add a link. Added links would only be converted to actual clickable link, when the domain of the link is white-listed by administrator.
Caption	:
Link URL	:	(Must starts with "http://")
Add \| Cancel

Allow to insert an image. Must be among the following file types - .jpg, .gif, .png & .bmp.
Image Url	:	Upload New (Image url must always starts with " http:// ")
Width	:	pixels (Must not be greater than 450px. Enter 0px for no resize)
Add \| Cancel

Allow to insert YouTube video. Insert the video embed code.
Embed Code	:
Add \| Cancel

Up to 5000 Characters are allowed. Current Count: 0

Your comment on this answer

Allow you to add a link. Added links would only be converted to actual clickable link, when the domain of the link is white-listed by administrator.
Caption	:
Link URL	:	(Must start with "http://" or "https://")
Add \| Cancel

Allow to insert an image. Must be among the following file types - .jpg, .gif, .png & .bmp.
Image Url	:	Upload New (Image url must always start with "http://" or "https://")
Width	:	pixels (Must not be greater than 450px. Enter 0px for no resize)
Add \| Cancel

Allow to insert YouTube video. Insert the video embed code.
Embed Code	:
Add \| Cancel

Up to 5000 characters are allowed. Current Count: 0

My Profile

You may answer and comment on any thread according to the Terms and Conditions.