Resolved Questions

Tonymendes

GS1 Logistic Label - Decodability issue - II

Hi Ben,
Based on your solution to my support call on the same issue check --> https://support.idautomation.com/Code-128/GS1-Logistic-Label---Decodability-issue/_1313

I am still not able to sort this out.
I am using a Crystal report ver 12.5 and a Zebra Z4mPlus printer with 203 DPI Printer (thermal printer)

Listed are the label requirements
Format: GS1-128, Height 32mm (AI02 -GTIN, AI37-Qty, A17-Date, AI10-Batch)
Label dimension A6 or 105mm x 148mm
So the barcode height is 32mm = 1.25in
As per your suggestion, I have gone about calculating the Points for the C128M font
the formula used is 12 * (height you want) / (height at 12 points) = (point size converted to integer)
= 12 * 1.25in / 0.5 (using IDAutomationC128M) = 30
Fonts Height Font Points
IDAutomationC128M 12 1.25 0.5 30

So when I use C128M font with 30 points, the height of the bar code is correct (78mm or 1.25in) however the width goes off the page.

Since I am using a 203 DPI Printer (thermal printer), the only font point I can use are 6, 12, 18, 24, 30, 36

I need the barcode height to be 78mm or 1.25 inches and the width to be under 105mm (size of the label) 95mm would be preferred keeping in the margins

But in all cases, the barcode is crossing the recommended width. So I have tried other fonts with the above point sizes but still no luck.

Am I doing something wrong, can you advise

Regards

Tony

08-26-13 11.1 year(s) ago

Report Abuse


Ben	Best Answer It is difficult to develop a barcode (width) based on millimeters because the actual data for a particular GS1 standard can vary. The height should be no problem. What is your required XDimension? Using a barcode font, the XDimension is equivalent to the point size. Once you have the appropriate XDimension, we can adjust the height with the font type (IDAutomationC128M, IDAutomationC128L, IDAutomationC128XL). Posted 11.1 year(s) ago (0) (0) Report Abuse

Find Interesting

Email to Others

Bookmark

Subscribe to Answer Alert

Add Comment

No comments yet. Be the first to comment.

Categories

» Barcode Applications » Barcode Components ● Barcode FAQ » Barcode Fonts » Barcode Hardware ● Barcode Learning » Font Encoders ● General License Questions ● General Sales Questions » MICR & OCR Fonts » Other ● Product Updates » Saas Hosted Products

Email this question link to friends

Your comment on this question

Allows to add a link. Added links would only be converted to actual clickable link, when the domain of the link is white-listed by administrator.
Caption	:
Link URL	:	(Must starts with "http://")
Add \| Cancel

Allow to insert an image. Must be among the following file types - .jpg, .gif, .png & .bmp.
Image Url	:	Upload New (Image url must always starts with " http:// ")
Width	:	pixels (Must not be greater than 450px. Enter 0px for no resize)
Add \| Cancel

Allow to insert YouTube video. Insert the video embed code.
Embed Code	:
Add \| Cancel

Up to 5000 Characters are allowed. Current Count: 0

Your comment on this answer

Allow you to add a link. Added links would only be converted to actual clickable link, when the domain of the link is white-listed by administrator.
Caption	:
Link URL	:	(Must start with "http://" or "https://")
Add \| Cancel

Allow to insert an image. Must be among the following file types - .jpg, .gif, .png & .bmp.
Image Url	:	Upload New (Image url must always start with "http://" or "https://")
Width	:	pixels (Must not be greater than 450px. Enter 0px for no resize)
Add \| Cancel

Allow to insert YouTube video. Insert the video embed code.
Embed Code	:
Add \| Cancel

Up to 5000 characters are allowed. Current Count: 0

My Profile

You may answer and comment on any thread according to the Terms and Conditions.